CAM QUIK-FIT Stirrup Mats are prefabricated and used in many precast concrete products such as pipe, box sections and elliptical shapes and in cast-in-place structures such as head walls, flat slab and floor slabs. When your designs require SHEAR REINFORCEMENT, think of prefabricated QUIK-FIT STIRRUP MATS.
CAM QUIK-FIT Stirrup Mats offer design flexibility. In any evolutionary process, innovation is the key to success, and that's the entire philosophy behind QUIK-FIT Stirrups Mats. Very simply, CAM has designed this Stirrup Mat System to meet any requirement you have on a project.
The 60,000 psi design allowable anchor strength of CAM QUIK-FIT Stirrup Mats was proven by rigorous testing for both the Minnesota and Missouri Department of Transportation, and now are specified in ASCE Standards for design.
Designers familiar with designing concrete products and structures requiring shear reinforcement will understand and appreciate the benefits of high anchor strength provided by QUIK-FIT Stirrup Mats. The loop system of QUIK-FIT Stirrup Mats provided more anchorage strength and weld surface, make mats easier to handle, and reduce installation time. The use of CAM QUK-FIT Stirrup Mats increase production and reduces costs, which means your project budget can be more easily met.
The QUIK-FIT Stirrup Mat’s closed loops system with the use of locking rods will hold the inner and outer reinforcement cages in tension, if required by design, and also in place. Locking rods can be used when mats are installed from the out side cage with the loops extending thru the inside cage.